Areas
The Netherlands, the twelve provinces, all municipalities and towns, with land and water separately and how many people live there.
Measure anything in the Netherlands
Search for a province, municipality, town, lake, river, motorway, dike, island, park or your own address. You see the area, the perimeter or the length straight away, and what you can compare it with. Or measure it yourself on the map.
For example: IJsselmeer A7 Afsluitdijk Texel Amsterdam Fryslân Vondelpark Netherlands
Streek
In Wierden · 4,765e largest of the 5,826 streken
Het Lageveld covers 36 ha. The edge is 2.4 km long and between the furthest points it is 903 m as the crow flies. It is the 4,765e largest of the 5,826 streken. That is as big as 50 football pitches of 105 × 68 m. It lies in the municipality of Wierden.
The edge and (dotted) the greatest distance.
Measured on the topographic map of the Kadaster (TOP10NL).
Tap a dot on the map and see what it lies in: the street, the water, the nearby roads and dikes, the municipality, the province and the whole of the Netherlands, each with its size. Turn on Measure for a line with the distance and the height; close the line and you see the area and how much water stands in it at a level you choose.
Tap the map to start. Drag to pan, pinch or use the scroll wheel to zoom.
The Netherlands, the twelve provinces, all municipalities and towns, with land and water separately and how many people live there.
Lakes, ponds, rivers, canals and the Waddenzee: the area, the length of the shore and how far it is from side to side.
Every motorway and N road: how long it is, which provinces it runs through and how long it takes to drive. And the big dikes and dams, from the Afsluitdijk to the Oosterscheldedam.
The volume, the footprint, the height, the facades and the roof of a house, and the plot around it.
Islands, polders, woods, heathland, dunes, parks, estates and airfields, everything with a name.
A walk, your garden or a piece of land: tap it on the map and see the distance, the area and the height.
The area of the Netherlands, the provinces and the municipalities (with land and water) and the population come from the CBS. The boundaries are from the Kadaster, the towns from the BAG, the water, the areas and the dikes from the Kadaster's topographic map (TOP10NL) and the roads from the Nationaal Wegenbestand of Rijkswaterstaat. We measure a house from the DoorNL 3D map.
The closer you look, the longer an edge gets: every little bend in the shore or the boundary counts. We measure the edge as the Kadaster's map draws it, including around islands and holes. A different map gives a different number.
Along the main carriageway, without slip roads. Where the two directions run separately, we take the average of both. A stretch numbered as an N road counts towards the N road.
The Kadaster's map draws a dike as an area, without a line down the middle. We estimate the length from the edge and the area, and the width is the area divided by that length.
The straight-line distance between the two points that are furthest apart. On the map that is the dotted line.
As accurate as you tap: zoomed in, to within a few decimetres. The height comes from the DoorNL elevation map, on a 25-metre grid, so a ditch or small dike can drop out. The map uses the Kadaster's Dutch coordinate system (RD); it is nowhere off by more than 0.02%.
Water and areas are included from 1 hectare and if they have a name on the Kadaster's map, dams from 1 km and dikes from 5 km. Anything not included you can measure yourself on the map above.